Re: Standel ap
Yes it does!
Thanks,
Chuck Schwickerath
http://guitarchuck.fourfour.com
https://www.facebook.com/pages/Chuck-Schwickerath/508226169273145
Chuck Schwickerath
http://guitarchuck.fourfour.com
https://www.facebook.com/pages/Chuck-Schwickerath/508226169273145
- guitarchuck
- Posts: 988
- Joined: Mon Aug 16, 2010 9:28 pm
For Paul: Standel volume
Paul,
How loud (volume control 1-10) did Chet normally run his Standel when recording with his electric guitars? Did he keep the volume the same when recording with his nylon string guitars?
How loud (volume control 1-10) did Chet normally run his Standel when recording with his electric guitars? Did he keep the volume the same when recording with his nylon string guitars?
Thanks,
George
George
- George Beasley
- Posts: 387
- Joined: Mon Aug 16, 2010 9:08 pm
Re: Standel ap
This thread is somewhat dated but I thought I would add this photo to it,
considering the subject of Standel amps. I believe this magazine clipping
is from an older Frets magazine. It's pretty cool. The caption on the clipping
reads "Joe Maphis and Merle Travis with customized Gibson Super 400s and early
Standel amps, 1955".
Robert El
considering the subject of Standel amps. I believe this magazine clipping
is from an older Frets magazine. It's pretty cool. The caption on the clipping
reads "Joe Maphis and Merle Travis with customized Gibson Super 400s and early
Standel amps, 1955".
Robert El
- Robert El
- Posts: 5
- Joined: Mon Aug 16, 2010 9:17 pm
Re: Standel ap
Chet used enough vol to get the correct level on his tape machine, thanks paul
- Paul Yandell
- Posts: 54
- Joined: Mon Aug 16, 2010 11:11 pm
Re: Standel ap
#1026 was originally built for Les Anderson, right?? Incidentally, my reissue 25L15 is a #26
And oh, I like the new look of the board!!
And oh, I like the new look of the board!!
- Jussi Huhtakangas
- Posts: 19
- Joined: Tue Sep 07, 2010 6:56 am
Re: Standel ap
The plate on the front of the amp says made for Leon Roach, this amp is the 2nd verison of the 25L, thanks paul
- Paul Yandell
- Posts: 54
- Joined: Mon Aug 16, 2010 11:11 pm