Drilling out the pins in a Bigsby

Talk about guitars, amps and other gear.

Drilling out the pins in a Bigsby

Postby Bill Patrick » Tue Feb 04, 2014 10:43 pm

I didn,t drill them out , they will pull out . Be careful to pull them straight out . Then drill the holes to size then bevel them . The Bigsby does not respond quite as well but I really like it much better . Maybe I should put another spacer under the spring but for me it is not necessary . Bill Patrick.
Bill Patrick
 
Posts: 3
Joined: Tue Aug 17, 2010 2:24 pm

Re: Drilling out the pins in a Bigsby

Postby Norm » Tue Feb 04, 2014 11:47 pm

Odd...
I didn't find any notable difference in the response of the unit when I did mine. I hadn't heard anyone else report a change of response either. I've always been a big time Bigsby user too...
...that's how it looks to me...The opinion expressed above is my own and does not necessarily reflect the views of this station. Your mileage may vary...

Audio samples: http://www.youtube.com/user/acountrygent/videos
That should do it.
Norm
 
Posts: 1310
Joined: Wed Aug 31, 2011 12:36 pm
Location: redwood city ca


Return to Guitars and Equipment

Who is online

Users browsing this forum: Google [Bot] and 1 guest