for you Bigsby Guitar lovers

Talk about guitars, amps and other gear.

for you Bigsby Guitar lovers

Postby Gary Smith » Tue Oct 19, 2010 8:44 am

Thom Bresh just took delivery of a new Bigsby guitar that is very similar to Merle's 1948 solid body.
You can see a nice picture of it on his "Facebook" page, I think it is spelled "Giletta-Bigsby" or very close to that.
Gary Smith
 
Posts: 84
Joined: Mon Aug 16, 2010 10:49 pm

Re: for you Bigsby Guitar lovers

Postby kentwkistler » Tue Oct 19, 2010 5:25 pm

A lot of people (R C Allen and Deke Dickerson come to mind) who possess bonafide Bigsby guitars, do not take kindly to these preposterous rip-offs. The only true Bigsby guitars, and there are very few, are those hand-made by Paul Bigsby, notwithstanding people or companies who have purchased the rights to the name "Bigsby" and so can continue to produce instruments they hope will fool the hopeful guitarist. Legal maybe, but as far as I am concerned, not very nice. K E N T
kentwkistler
 
Posts: 20
Joined: Tue Aug 17, 2010 12:36 pm

Re: for you Bigsby Guitar lovers

Postby thenorm » Tue Oct 19, 2010 6:52 pm

I agree it's disingenuous (five dollar word... means 'sneaky') to produce "Bigsby" guitars now that PA is gone and he quit making them himself. I cringe at the "new" D'Angelicos. They're made by the same factory that makes Gretsch so the quality is good as far as it goes but John carved his tops and necks with an apprentice to help him so they just ain't the same.

I looked at the guitar being talked about and I think it is an honest effort to replicate PA's guitar (Birdseye maple etc )and as such might get a pass although I can't read the headstock. I don't know if it reads "Bigsby" or not. I think it may not actually say "Bigsby". There's a guy (whose name escapes me) that is making great looking copies of the Maphis Mos-Rite double neck. Looks good to me. Doesn't say "Mos-Rite" but it looks like the guy was as faithful to Semie's ideal as he could be.

And remember, Martin is making a limited run of a replication of the Martin/Bigsby Merle had. I don't kmow if they use the Bigsby name. I suppose they could if they paid Gretsch (who owns the name now, I think) a royalty on the things.

I just shrug. What can you do? But I think if someone handed me one of those new instruments and called it by what it looked like without adding that it's a replica I'd know I was talking to a dreamer...

We can't get the originals anymore (unless we want to pay an obscene price) so we're stuck I guess...
thenorm
 
Posts: 482
Joined: Mon Aug 16, 2010 8:29 pm

Re: for you Bigsby Guitar lovers

Postby Gary Smith » Tue Oct 19, 2010 8:00 pm

The Galletta-Bigsby guitars actually say "Bigsby" on the head stock. Bresh says his has an original style pickup in it, so I belive him.
As far as the D'Angelico guitars go, I have one of the newer Excel guitars, best sounding guitar I've ever owned, including my 64 country gent. the workmanship is spectacular, the price is reasonable,and it is made in Asia.

There are several companies, that are making either acoustic bodies with Bigsby necks for sale, I believe either martin or gibson comes to mind.

Harvey Leach makes a D-28 replica with a Bigsby neck, two models, one real fancy and one more plane, just like Merle's acoustic. These are fully custom and are about $5,000, by order only.

Anyway, all it takes in money.
:o
Gary Smith
 
Posts: 84
Joined: Mon Aug 16, 2010 10:49 pm

Re: for you Bigsby Guitar lovers

Postby Vidar Lund » Wed Oct 20, 2010 4:22 am

Is this one more or less like the one in question?

http://www.streetsoundsnyc.com/servlet/ ... W--/Detail
Vidar Lund
 
Posts: 421
Joined: Tue Aug 17, 2010 4:20 am

Re: for you Bigsby Guitar lovers

Postby thenorm » Wed Oct 20, 2010 9:00 am

No, Vidar..
It's a dead-on rplica of the early solid body PA made for Travis.

Google

Galletta

and you'll find it. The on site photo is small but you can lee it looks good and is leaning against a nice Standell.

The bottom lin on all these replicas like this or mass produced D'Angelicos that once were hand made one at a time may turn out fine guitars but they lack the special touch and indescribable "mojo" the orighal makers gave to their instruments.
thenorm
 
Posts: 482
Joined: Mon Aug 16, 2010 8:29 pm

Re: for you Bigsby Guitar lovers

Postby guitarchuck » Wed Oct 20, 2010 12:42 pm

Here's a photo of the solidbody Bigsby headstock in question: Image I found several photos at this link: http://s25.photobucket.com/albums/c100/mdm2k2/breshman/?sort=ascending. I think reissues are great as long as they are identified as such. The Martin has Bigsby on the front of the headstock and Martin stamped on the back of it. I love the Gretsch reissues. I don't think it lessens the value of the originals, if anything I think it draws more attention and interest to the history of the originals.
guitarchuck
 
Posts: 985
Joined: Mon Aug 16, 2010 9:28 pm

Re: for you Bigsby Guitar lovers

Postby thenorm » Wed Oct 20, 2010 2:43 pm

"... I don't think it lessens the value of the originals..."
It doesn't. If anything it increases the value of the originals. I

There are some great reissues out there. Some (as I think most would agrree) like Gretsch have never been better. Prior to them being made by Terada there were some real horror stories about some of the units made at the Brooklyn factory some of which I saw myself when I worked in a music store. The worse one was opening a brand new Tennesseean in front of a customer only to see the neck had popped out of its joint. Another one had a white paint dribble on a Tenny's f-hole outline. I'd say the current Treada Gretsch guitars are an improvement but you still see the "vintage" ones going for hellacious prices.

But, as I say, there are great looking and playing reissues out there but, to me, the handmades like Paul Bigsby's and John D'Angelicos in particular, are things that had their time and can't be truly replicated.

The guy making the Travis/Bigsby clones looks like he's doing a good job trying to make a full on copy and he may have taken it as far as the pickups, too, I don't know. Bigsby was popular during his day because a solid guitar was an absolutely brand new idea but he was glad to quit making them because I don't think he felt he was getting what he thought he should ahve for his time. I think he managed one a month. Leo Fender made more cheaper.

The Martin/Bigsby is fair since it does what the original one did which is to add a non-standard neck to a Martin guitar. There was a good testimonial for a modern D'Angelico but those, I think, don't have carved tops which make all the difference in the world.

That's part of the fun of playing guitar, y'know... splitting hair on inconsequential things.
thenorm
 
Posts: 482
Joined: Mon Aug 16, 2010 8:29 pm

Re: for you Bigsby Guitar lovers

Postby Vidar Lund » Wed Oct 20, 2010 4:31 pm

From "The Story of Paul Bigsby - Father of the modern electric solidbody Guitar" by Andy Babikuk 2008: "The best estimate today puts the total of Bigsby instruments at 23 Standard electric guitars, 15 re-necked and customized acoustic guitars, 6 mandolins, about 75 steel guitars, and a number of mandolins and guitars to which he added pickups and/or pickguards."
Vidar Lund
 
Posts: 421
Joined: Tue Aug 17, 2010 4:20 am

Re: for you Bigsby Guitar lovers

Postby Gary Smith » Wed Oct 20, 2010 4:51 pm

scroll down in the link, here is the "all bigsby band" at the 5th annual guitar geek festival in Anaheim ca, I believe it was in 2008.

http://www.dekedickerson.com/photoarchi ... index2.htm
Gary Smith
 
Posts: 84
Joined: Mon Aug 16, 2010 10:49 pm

Next

Return to Guitars and Equipment

Who is online

Users browsing this forum: No registered users and 1 guest