Ray Butts humbucker question...

Talk about guitars, amps and other gear.

Ray Butts humbucker question...

Postby George Beasley » Sat Jul 16, 2011 1:30 am

Today at CAAS, I ran into Ray Butts daughter. I mentioned that I had just bought a pickup from Chuck, and was going to drop it into one of my guitars. She asked if it was encased in epoxy...which it was. She said she is trying to find one that is not, as TV Jones would like to recreate that pickup, and needs to take one apart. If any of you have one, you might want to look her up.
Thanks,
George
George Beasley
 
Posts: 387
Joined: Mon Aug 16, 2010 9:08 pm

Re: Ray Butts humbucker question...

Postby smokymtguitar09 » Sat Jul 16, 2011 6:15 am

I wonder how you can tell if it is encased in epoxy? I have one installed in my Gibson CG.
Ronnie Evans
smokymtguitar09
 
Posts: 449
Joined: Tue Aug 17, 2010 11:15 am

Re: Ray Butts humbucker question...

Postby thenorm » Sat Jul 16, 2011 10:02 am

Should be pretty easy if you pull it and look at the underside.
Inventors cast the finished product in epoxy (looks like opaque plastic) to prevent the reverse engineering TV Jones needs to do to copy it.
thenorm
 
Posts: 482
Joined: Mon Aug 16, 2010 8:29 pm

Re: Ray Butts humbucker question...

Postby guitarchuck » Sat Jul 16, 2011 11:26 am

I would be really surprised if there are any around that are not encased in epoxy. From what I have seen and heard Ray did this to everything that he built in his later years to prevent people from making copies of his designs. I had a Gibson Studio CE that had belonged to Paul. Ray built the pre-amp in it. It was encased in epoxy also.
guitarchuck
 
Posts: 988
Joined: Mon Aug 16, 2010 9:28 pm


Return to Guitars and Equipment

Who is online

Users browsing this forum: No registered users and 27 guests

cron